USD 
-
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Available sizes: MK1 MK2 MK3 MK4 MK5 MK6 -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Live centres are determined for the lathe-turning for quick and simple clamping hollow workpieces with big diameter which cannot be clamped by common live center. End of revolving part is cone 1:10 for setting clamping inserts with apex angle 60° or 90°. Live centers are provided with the cone Morse taper according to CSN 22 04208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK3 MK4 MK5 MK6 -
The live centers are specified for NC lathe. Profile of clamping part allows easy access tool to workpiece, which it is suitable for cutting shaped parts. Design of live center allows to adjust the clearance in radial bearing in front of part of live center. Live centres have Morse cone according to ČSN 2204208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK2 MK3 MK4 MK5 -
The live centers with interchangeable inserts are for working on lathes. Their design allows universal use in the piece production. End of revolving part is ended by cone hollow for clamping inserts a ÷ g. Morse cone CSN 22 0420 (DIN 228, ISO 296) without clamping thread. Special supply is with set of interchangeable inserts according to customer wish. Spare parts are individual interchangeable inserts. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Dead centres are for clamping workpieces on machine-tools or checking instruments. DIN 3311, 60 ° apex angle. Dead centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK0 MK1 MK2 MK3 MK4 MK5 MK6 -
Change gear wheel for speed gearbox for lathes SN40-50 and SUI40-50. Module: 1.5 Number of teeth: 30, 40, 44, 48, 50, 60, 71, 75, 80, 90, 96, 105, 110, 113, 120, 126, 127 -
Gib for cross slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm 9,5 mm 10 mm 10,5 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Gib for tool slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Strip piece for apron for lathe SN40, SN45 and SN50. Available sizes: 7 mm 7.5 mm 8 mm 8.5 mm 9 mm 9.5 mm 10 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. Screws for the strip piece: 807098 -
Gib for cross slide for carriage and slides for lathe SV18R/RA/RD. Available sizes: 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Gib for tool slide for carriage and slides for lathe SV18R/RA/RD. Available sizes: 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Scroll 243861 for these chucks: • IUS • IUZ • IUT • IUD • IUM -
Scroll 243881 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG
-
Pinion 243862 for these chucks: • IUS • IUZ • IUT • IUD • IUM -
Pinion 243882 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG
-
Pinion 243888 for these chucks: • IUGS • IUHS
-
Self-centring scroll chuck TOS Svitavy IUH/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN6350. Contains: • 1 set of base jaw ZC • 1 set of hard reversible top jaw NT • 1 spanner -
Flange for SV18 lathe. Material: gray cast iron Thread: M68x6 -
Short taper flange IUG-D/11 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm -
Short taper flange IUS-B/11 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm -
Base jaw SM and soft top jaw ND/NC. Set of 3. Sold in sets. -
Base jaw SM and soft top jaw ND/NC. Set of 4. Sold in sets.
-
Monoblock solid soft jaw MC. Set of 3. Sold in sets. -
Hard inside jaw SCN for chucks TOS. Ground clamping surfaces. Set of 4. Sold in sets. -
Hard inside jaw SCN for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 3. Sold in sets.
-
Hard inside jaw SCN for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets.
-
Hard outside jaw SCV for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 3. Sold in sets. -
Hard outside jaw SCV for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets.
-
Locking pin of pinions.