USD 
-
Holder of nut for apron for lathe SN32, SN40-50 and SN55-71. -
Gear wheel - 807044 for apron for lathes SN32, SN40-50 and SN55-71. -
Screw - 807096 for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Coolant pump for machine tools. Immersion depth: 100 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C. -
Lever - 34 07 211 for apron for lathe SUI63 and SUI80. -
Hard inside jaw SCN for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets. -
Hard outside jaw SCV for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets. -
Coolant pump for machine tools. Immersion depth: 120 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Gib for cross slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm 9,5 mm 10 mm 10,5 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Strip piece for apron for lathe SN40, SN45 and SN50. Available sizes: 7 mm 7.5 mm 8 mm 8.5 mm 9 mm 9.5 mm 10 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. Screws for the strip piece: 807098 -
Gib for cross slide for carriage and slides for lathe SV18R/RA/RD. Available sizes: 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Gear wheel - 902040 for speed gearbox for lathe SV18R and SV18RA. Shaft III: 902019 -
Braking mechanism for lathe SV18R a SV18RA. -
Gear wheel 20/2.5 - 803069 for speed gearbox for lathes SN40, SN45 and SN50. -
Gear wheel 25/3 - 803088 for speed gearbox for lathes SN40, SN45 and SN50. -
Gear wheel 27/2.75 - 803062 for speed gearbox for lathes SN40, SN45 and SN50. -
Driver 803108 for speed gearbox for lathes SN40, SN45 and SN50. Complete set: driver 803129 driver 803108 internal friction disc 803222 external friction disc 803220 -
Gear wheel for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. Shaft for gear wheel: 806074 -
gear wheel for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. Shaft for gear wheel: 806031 -
Bush 806102 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Shifter 806011 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Shifter 806012 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Cam - rapid traverse for apron for lathes SN40B, SN45B, SN50B, SN55B, SN63B and SN71B. Inner diameter of the cam: ⌀ 42 mm. Included: 3 pcs spings, 3 pcs roller and 3 pcs pins. -
Cam - rapid traverse for apron for lathes SN40C, SN45C, SN50C, SN55C, SN63C, SN71C, SN500, SN630, SN710. Inner diameter of the cam: ⌀ 40 mm. Included: 5 pcs spings, 5 pcs roller and 5 pcs pins. Please note: You may have a 3 point cam on your C version of the lathe. This is the new version of the cam for C models. The important parameter is the inner diameter of the cam, the number of points has no effect on the working conditions. -
Coolant pump for machine tools. Immersion depth: 150 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Flange for apron for lathes SUI40 and SUI50. -
Coolant pump for machine tools. Immersion depth: 180 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 200 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Half-nut for lathe SV18R, SV18RA and SV18RD. -
Wheel - 906017 for lathe SV18R, SV18RA and SV18RD.