USD 
-
Shaft III - right - 903038 for lathe SV18R, SV18RA and SV18RD. -
Self-centring scroll chuck TOS Svitavy IUG/4-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUH/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN6350. Contains: • 1 set of base jaw ZC • 1 set of hard reversible top jaw NT • 1 spanner -
Independent face plate LUD A four-jaw chuck in which the clamping of the workpiece is ensured by an independent movement of the jaws by means of a trapezoidal screw engaged with the jaw. • chuck body - ductile cast iron • 4-jaw chuck • clamping the chuck on the machine spindle • Type M2 through cylindrical mounting with screws from the rear or front mounting • Type A, B, D using an intermediate flange -
Flange for SV18 lathe. Material: gray cast iron Thread: M68x6 -
Short taper flange IUG-A/5 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 160 mm - 200 mm - 250 mm - 315 mm -
Short taper flange IUG-A/6 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm
-
Short taper flange IUG-A/8 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm
-
Shaft with pinion 904019 - SV18RA for apron for lathe SV18RA and SV18RD -
Shaft with pinion 904020 - SV18R for apron for lathe SV18R. -
Shaft with pinion 904020 - SV18RA for apron for lathe SV18RA and SV18RD
-
Bushing - 904500 for lathe SV18R, SV18RA and SV18RD. -
Shaft with pinion 904558 - SV18R for apron for lathe SV18R.
-
Half-nut for lathe SV18R, SV18RA and SV18RD. -
Lever for apron for lathe SV18R, SV18RA and SV18RD.