USD 
-
Holder of nut for apron for lathe SN32, SN40-50 and SN55-71. -
Gear wheel - 807044 for apron for lathes SN32, SN40-50 and SN55-71. -
Screw - 807096 for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Coolant pump for machine tools. Immersion depth: 100 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C. -
Lever - 34 07 211 for apron for lathe SUI63 and SUI80. -
Hard inside jaw SCN for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets. -
Hard outside jaw SCV for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets. -
Coolant pump for machine tools. Immersion depth: 120 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Gib for cross slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm 9,5 mm 10 mm 10,5 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Strip piece for apron for lathe SN40, SN45 and SN50. Available sizes: 7 mm 7.5 mm 8 mm 8.5 mm 9 mm 9.5 mm 10 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. Screws for the strip piece: 807098 -
Gib for cross slide for carriage and slides for lathe SV18R/RA/RD. Available sizes: 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Gear wheel - 902040 for speed gearbox for lathe SV18R and SV18RA. Shaft III: 902019 -
Braking mechanism for lathe SV18R a SV18RA. -
Gear wheel 20/2.5 - 803069 for speed gearbox for lathes SN40, SN45 and SN50. -
Gear wheel 25/3 - 803088 for speed gearbox for lathes SN40, SN45 and SN50.