USD 
-
Brass bushing 803058 for apron for lathe SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Brass bushing 803059 for apron for lathe SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
CAMLOCK bolt and nut for flanges DIN 55029 inch, ISO 702/II inch, ČSN ISO 702/II inch. -
Change gear wheel for speed gearbox for lathes SN40-50 and SUI40-50. Module: 1.5 Number of teeth: 30, 40, 44, 48, 50, 60, 71, 75, 80, 90, 96, 105, 110, 113, 120, 126, 127 -
Gear wheel conic - 903082 for lathe SV18R, SV18RA and SV18RD. -
Gear wheel 903079 for shaft II and IV for lathe SV18R, SV18RA and SV18RD. -
Holder - 906072 for lathe SV18R, SV18RA and SV18RD. -
Excenter - 906019 for lathe SV18R, SV18RA and SV18RD. -
Pawl - 906075 for lathe SV18R, SV18RA and SV18RD. -
Tailstock jaws (upper and bottom) for lathe SN40, SN45 and SN50. -
Rod 806029 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Cover for apron for lathes SUI40 and SUI50. -
Pawl for toolblock for carriage and slides for lathe SN40, SN45 and SN50. Composed: 804030 - pawl 804084 - spring 80421 - bushing -
Gear wheel for oil pump - 803056 for speed gearbox for lathes SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710 -
Gear wheel for oil pump - 803057 for speed gearbox for lathes SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710 -
Threading plate for thread cutting gearbox for SV18R. -
Cam - 902500 for speed gearbox for lathe SV18R and SV18RA. -
Shaft for shifter VII for speed gearbox for lathe SV18R and SV18RA. -
Gear wheel - 903074 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903073 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903072 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903071 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903070 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903069 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903068 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903066 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903065 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903062 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft III: 903037 -
Gear wheel - 903054 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903034 -
Gear wheel - 903511 for lathe SV18R, SV18RA and SV18RD. -
Change gear wheel - 24t for lathe SV18R, SV18RA and SV18RD. -
Lever of shifter apron for lathes SUI40 and SUI50. -
Brass bushing - 803117 for speed gearbox for lathes SN40, SN45 and SN50 -
Microswtich cover on chuck guard for lathes SN40, SN50, SN63, SN71C. -
Toothed clutch - 905021 for apron for lathe SV18R, SV18RA and SV18RD. -
Speed plate for lathes SUI32 and SUI32A. Dimensions: 363x74 mm -
Dead centres are for clamping workpieces on machine-tools or checking instruments. DIN 3311, 60 ° apex angle. Dead centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK0 MK1 MK2 MK3 MK4 MK5 MK6 -
Half dead centres are for clamping workpieces on machine-tools or checking instruments. DIN 3317, 60 ° apex angle. Dead centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK0 MK1 MK2 MK3 MK4 MK5 MK6 -
Nut case for SV18R, SV18RA and SV18RD lathes. -
Shaft with pinion 904020 - SV18R for apron for lathe SV18R. -
Shaft with pinion 904020 - SV18RA for apron for lathe SV18RA and SV18RD
-
Tailstock lever for SV18R, SV18RA and SV18RD lathes. -
Monoblock solid soft jaw MC. Set of 3. Sold in sets. -
Gear wheel - 902042 for speed gearbox for lathe SV18R and SV18RA. -
Duplex gear wheel 903078 for shaft III for lathe SV18R, SV18RA and SV18RD.