USD 
-
Gear wheel - 904023 for apron for lathe SV18R, SV18RA and SV18RD. -
Gear wheel - 905022 for apron for lathe SV18R, SV18RA and SV18RD. -
Toothed clutch - 905021 for apron for lathe SV18R, SV18RA and SV18RD. -
Pin of toothed clutch for apron for lathe SV18R, SV18RA and SV18RD. -
Duplex gear wheel - 905024 for apron for lathe SV18R, SV18RA and SV18RD. -
Shaft - 905010 for apron for lathe SV18R, SV18RA and SV18RD. -
Shaft with pinion 904018 - SV18R for apron for lathe SV18R. -
Shaft with pinion 904018 - SV18RA for apron for lathe SV18RA and SV18RD
-
Short taper flange IUG-A/8 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm -
Short taper flange IUG-A/6 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm
-
Short taper flange IUG-A/5 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 160 mm - 200 mm - 250 mm - 315 mm
-
Flange for SV18 lathe. Material: gray cast iron Thread: M68x6 -
Independent face plate LUD A four-jaw chuck in which the clamping of the workpiece is ensured by an independent movement of the jaws by means of a trapezoidal screw engaged with the jaw. • chuck body - ductile cast iron • 4-jaw chuck • clamping the chuck on the machine spindle • Type M2 through cylindrical mounting with screws from the rear or front mounting • Type A, B, D using an intermediate flange -
Self-centring scroll chuck TOS Svitavy IUH/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN6350. Contains: • 1 set of base jaw ZC • 1 set of hard reversible top jaw NT • 1 spanner -
Self-centring scroll chuck TOS Svitavy IUG/4-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws