USD 
-
Screw and nut for cross slide for carriage and slides for lathe SN55 and SN500. Inch version. 4TPI. The nut is a semi-finished product. -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Short taper flange IUS-B/5 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 160 mm - 200 mm - 250 mm - 315 mm -
Short taper flange IUG-B/5 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 160 mm - 200 mm - 250 mm - 315 mm
-
Toolblock SV18RA with screws, lever and key for lathe SV18R, SV18RA and SV18RD. -
Bushing with hex hole 36 mm - 34 07 151 for apron for lathe SUI63 and SUI80. -
Gear 60/3,25 - 703038 wheel for speed gearbox for lathe SN55, SN63 and SN71. -
Toolblock with screws and spanner for carriage and slides for lathe SUI40 and SUI50. -
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1000 mm - 2 pieces. Sold in pairs. -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Available sizes: MK1 MK2 MK3 MK4 MK5 MK6 -
Hard outside jaw SCV for chucks TOS. Ground clamping surfaces. Set of 4. Sold in sets. -
Hard inside jaw SCN for chucks TOS. Ground clamping surfaces. Set of 4. Sold in sets. -
Tailstock manual feed complete with handle for lathes TOS Trenčín / TRENS SN55, SN63 and SN71. -
4 way toolblock with screws for carriage and slides for lathe SN40, SN45 and SN50. Composed: 804054 – 4 way toolblock 804025 – ring 804027 – ring 804024 – bushing 804054 – screw 804514 – screw – 8 pieces -
Screw and nut for cross slide screw for lathe SU50 and SU50A TOS Lipník nad Bečvou. The Nut is a semi-finished product.