USD 
-
Tailstock Nut for SV18R, SV18RA and SV18RD lathes. -
Nut 907026 with set screws for SV18R, SV18RA and SV18RD lathes. Set screws: * set screw long 907022 * set screw short 907023 -
Nut case for SV18R, SV18RA and SV18RD lathes. -
Nut M18x1,5 for speed gearbox for lathe SV18R and SV18RA. -
Nut M22x1,5 for speed gearbox for lathe SV18R and SV18RA.
-
Oil filter 803260 for speed gearbox for lathes SN40, SN45 and SN50. -
Oil filter for speed gearbox for lathes SN40, SN45, SN50C, SN63C and SN71C. -
Oil filter reduction and lid complete for speed gearbox for lathes SN40, SN45 and SN50. Used to replace the old type of filter 803266 for the new type 813019. See our blog about filter replacement. -
Oil mark M24x1,5 for lathe SV18R, SV18RA and SV18RD. -
Oil mark M36x1,5 for lathe SV18R, SV18RA and SV18RD.
-
Oil pump complete for speed gearbox for lathes SN40, SN45 and SN50. -
Packing piece for lathe SV18R, SV18RA and SV18RD. -
Pawl - 906075 for lathe SV18R, SV18RA and SV18RD. -
Pin for lathe SUI32. -
Pin - 904045 for lathe SV18R, SV18RA and SV18RD. -
Pin for apron for lathe SUI40 and SUI50. Gear wheel for pin: 30 07 002 -
Pin - 906016 for lathe SV18R, SV18RA and SV18RD. -
Pin for apron for lathe SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. Gear wheel for pin: 807045 -
Pin 907012 for SV18R, SV18RA and SV18RD lathes. -
Pin of toothed clutch for apron for lathe SV18R, SV18RA and SV18RD. -
Pinion - 30 04 010 for carriage and slides for lathe SUI40 and SUI50. -
Pinion - 34 07 110 for apron for lathe SUI63 and SUI80. Module 3 / 17 teeth. -
Pinion - 34 07 126 for apron for lathe SUI63 and SUI80. Module 4 / 11 teeth. -
Pinion - 807180 for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Pinion 18/3.75 803089 for speed gearbox for lathes SN40, SN45 and SN50. Gear wheels for pinion: 803058 803064 -
Pinion 804015 for carriage and slides for lathe SN40, SN45 and SN50. -
Pinion 804017 for carriage and slides for lathe SN40, SN45 and SN50. -
Pinion conic - 903083 for lathe SV18R, SV18RA and SV18RD. -
Pinion 243882 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG -
Pinion 243888 for these chucks: • IUGS • IUHS
-
Pinion 243862 for these chucks: • IUS • IUZ • IUT • IUD • IUM
-
Pinion VI - 807035 for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Flat pulley for SV18R, SV18RA and SV18RD lathes. -
Pulley 803032 for speed gearbox for lathes SN40, SN45 and SN50. -
Pulley for speed gearbox for lathe SV18RA. Opening dia: 28 mm Shaft for pulley: 902019 -
Pulley for speed gearbox for lathe SV18RD. Opening dia: 38 mm
-
Pump for speed gearbox for lathe SV18R and SV18RA. -
Pump for lubrication for apron for lathes SN40, SN45 and SN50. -
Toothed rack 361 mm for lathes SN40, SN45 and SN50. -
Toothed rack 504 mm for lathes SN40, SN45 and SN50.
-
Toothed rack 856 mm for lathes SN40, SN45 and SN50.
-
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1000 mm - 2 pieces. Sold in pairs. -
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1250 mm - 2 pieces. Sold in pairs.
-
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 750 mm - 2 pieces. Sold in pairs.
-
Ratchet wheel - shaft VI - 902041 for speed gearbox for lathe SV18R and SV18RA.