USD 
-
Tailstock lever for SV18R, SV18RA and SV18RD lathes. -
Lever 803214 for speed gearbox for lathes: - SN32 - SN40, SN45, SN50 - SN55, SN63, SN71 - SM16 - SUI32 - SUI40-50 Required quantity: 24 pieces -
Lever for lathe SUI32. -
Lever 803211 for speed gearbox for lathes SN400, SN500, SN630 and SN710. Required quantity: 24 pieces -
Lever for apron for lathes SN500, SN630 and SN710. -
Supply voltage: DC 10 to 48 V, AC 12 to 35 V Consumption: 11W Light source: LED Cree XHP-L Ra=80 Luminous flux: 1100 lm Minimal lifetime: 50 000 h Ingress protection: IP67 Ambient temperature: -20 to +50°CSize Luminary body diameter: 70 mm Luminary body length: 70 mm Stand height: 46 mm Flexible tube length: 700 mm -
Supply voltage: DC 10 to 48 V, AC 12 to 35 V Consumption: 11W Light source: LED Cree XHP-L Ra=80 Luminous flux: 1100 lm Minimal lifetime: 50 000 h Ingress protection: IP67 Ambient temperature: -20 to +50°C
Size Luminary body diameter: 70 mm Luminary body length: 70 mm Stand height: 46 mm Flexible tube length: 450 mm -
Lead screw for lathes SV18R, SV18RA and SV18RD, length 750 mm. -
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1250 mm.
-
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1000 mm.
-
Lead screw for lathes SN40-50, length 2000 mm.
-
Lead screw for lathes SN40-50, length 1500 mm.
-
Lead screw for lathes SN40-50, length 1000 mm.
-
Label holder for lathe SV18R, SV18RA and SV18RD. -
Key with spring 243870 for LUD chucks. -
Key with spring 243864 for IUS and IUG chucks.
-
Key 804035 for carriage and slides for lathe SN40, SN45 and SN50. -
Key 704050 for carriage and slides for lathe SN55, SN63, SN71, SN630 and SN710. -
Tailstock jaws (bottom and upper) for SV18R, SV18RA and SV18RD lathes. -
Internal friction disc for clutch for speed gearbox for lathes: - SN32 - SN40, SN45, SN50 - SM16 - SUI32 Required quantity: 16 -
Internal friction disc for clutch for speed gearbox for lathes: - SN55, SN63, SN71 - SN400, 500, 630, 710 - SUI40-50 Required quantity: 16 -
Internal friction disc for brake for speed gearbox for lathes: - SN32 - SN40, SN45, SN50 - SN55, SN63, SN71 - SM16 - SUI32 - SUI40-50 Required quantity for SN32, SN40, SN45, SN50, SM16: 5 Required quantity for SN55, SN63, SN71, SUI32, SUI40, SUI50: 6 -
Internal friction disc for brake for speed gearbox for lathes: - SN400, SN500, SN630, SN710 Required quantity: 6 -
Intermediate gear wheel 807304 for apron for lathe SN32, SN40-50 and SN55-71. -
Insert 806101 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Independent face plate LUD A four-jaw chuck in which the clamping of the workpiece is ensured by an independent movement of the jaws by means of a trapezoidal screw engaged with the jaw. • chuck body - ductile cast iron • 4-jaw chuck • clamping the chuck on the machine spindle • Type M2 through cylindrical mounting with screws from the rear or front mounting • Type A, B, D using an intermediate flange -
I-II-III plate for lathes SUI40 and SUI50. -
Tailstock vernier hub for SV18R, SV18RA and SV18RD lathes. -
Hub for carriage and slides for lathe SN40, SN45 and SN50. -
Holder of nut for apron for lathe SN32, SN40-50 and SN55-71.