USD 
-
Gear wheel - 902040 for speed gearbox for lathe SV18R and SV18RA. Shaft III: 902019 -
Ring - 902276 for speed gearbox for lathe SV18R and SV18RA. -
Adjusting screw 901070 for SV18R, SV18RA and SV18RD lathes. -
Coupling wheel - left 901036 for SV18R, SV18RA and SV18RD lathes. -
Coupling wheel - right 901035 for SV18R, SV18RA and SV18RD lathes. -
Flat pulley for SV18R, SV18RA and SV18RD lathes. -
Gear wheel - template for SV18RD lathes. -
Gear wheel - template 901028 for SV18R and SV18RA lathes. -
Gear wheel - template 901034 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel 901030 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel 901031 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel 901033 for SV18R, SV18RA and SV18RD lathes. -
Shaft IV - 901019 - headstock for lathes SV18R and SV18RA. Shaft clutch: * gear clutch - 901037 (link to product 901037) -
Gear clutch 901076 for lathes SV18R, SV18RA and SV18RD. Spare parts and accessories for TOS / TRENS Trenčín lathes. -
Threading plate for thread cutting gearbox for SV18R. -
Set of rivets (30 pieces) for plates. -
Supply voltage: max 24V DC Light source: halogen bulb 24V/100W - G6.35 Luminous flux: 800 lm Bulb lifetime: 2000 h Ingress protection: IP67Size Luminary body diameter: 86 mm Luminary body length: 71 mm Stand height: 46 mm Flexible tube length: 700 mm -
Supply voltage: max 24V DC Light source: halogen bulb 24V/100W - G6.35 Luminous flux: 800 lm Bulb lifetime: 2000 h Ingress protection: IP67
Size Luminary body diameter: 86 mm Luminary body length: 71 mm Stand height: 46 mm Flexible tube length: 450 mm -
Supply voltage: DC 10 to 48 V, AC 12 to 35 V Consumption: 11W Light source: LED Cree XHP-L Ra=80 Luminous flux: 1100 lm Minimal lifetime: 50 000 h Ingress protection: IP67 Ambient temperature: -20 to +50°CSize Luminary body diameter: 70 mm Luminary body length: 70 mm Stand height: 46 mm Flexible tube length: 700 mm -
Supply voltage: DC 10 to 48 V, AC 12 to 35 V Consumption: 11W Light source: LED Cree XHP-L Ra=80 Luminous flux: 1100 lm Minimal lifetime: 50 000 h Ingress protection: IP67 Ambient temperature: -20 to +50°C
Size Luminary body diameter: 70 mm Luminary body length: 70 mm Stand height: 46 mm Flexible tube length: 450 mm -
Coolant pump for machine tools. Immersion depth: 300 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C. -
Coolant pump for machine tools. Immersion depth: 200 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 180 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 120 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 100 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 85 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 400 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 300 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 200 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 180 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 85 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Bolt for LUD chuck TOS Svitavy. -
Bolt and nut for flange type B - DIN 55027, ISO 702/III, ČSN ISO 702/II. -
Hard outside jaw SCV for chucks TOS. Ground clamping surfaces. Set of 4. Sold in sets. -
Hard inside jaw SCN for chucks TOS SUPERIOR. Ground clamping surfaces. Set of 4. Sold in sets. -
Hard inside jaw SCN for chucks TOS. Ground clamping surfaces. Set of 4. Sold in sets.
-
Hard reversible jaw LC for LUD plate - TOS Svitavy. Set of 4 jaws. Sold in sets. -
Monoblock solid soft jaw MC. Set of 4. Sold in sets. -
Base jaw SM and soft top jaw ND/NC. Set of 4. Sold in sets. -
Short taper flange IUS-D/11 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm -
Short taper flange IUS-D/8 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm
-
Short taper flange IUS-D/6 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm
-
Short taper flange IUS-D/5 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 160 mm - 200 mm - 250 mm - 315 mm
-
Short taper flange IUS-B/11 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm -
Short taper flange IUS-B/8 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm