USD 
-
Short taper flange IUG-A/8 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm -
Self-centring scroll chuck TOS Svitavy IUS/4-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
SV18 - screw - cross slide with conical ruler for lathe SV18R, SV18RA and SV18RD. -
Pump for lubrication for apron for lathes SN40, SN45 and SN50. -
Gear wheel 63/2.5 - 803064 for speed gearbox for lathes SN40, SN45 and SN50. Pinion for gear wheel: 803089 -
Lubrication pump for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. Composed: washer 806125 piston 806036 spring 806161 pump housing 806007 sealing 806198 plug 806147 -
Screw and nut - cross slide for carriage and slides for lathe SUI40 and SUI50. -
Duplex gear wheel for speed gearbox for lathe SN55, SN63 and SN71. -
Self-centring scroll chuck TOS Svitavy IUG/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Toothed bushing 803083 for speed gearbox for lathes SN40, SN45 and SN50. Gear wheel for bush: 803090 -
Shaft - 34 07 123 for apron for lathe SUI63 and SUI80. Module 4,5 / 11 teeth. -
Complete set of wipers lathe SN55, SN63 and SN71. -
Short taper flange IUG-D/6 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm -
Short taper flange IUS-D/6 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm