USD 
-
Gib for tool slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Scroll 243861 for these chucks: • IUS • IUZ • IUT • IUD • IUM -
Speed plate (sticker) for speed gearbox for lathe SV18RA. -
Screw for tool slide lardon for carriage and slides for lathe SN40, SN45 and SN50. Required: 2 pieces Lardon: 804037 -
Screw for cross slide lardon for carriage and slides for lathe SN40, SN45 and SN50. Required: 2 pieces Lardon: 804036
-
Spring and finger for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. Composed: 807113 - spring 807024 - finger -
Bushing 22 mm for apron for lathes SN32, SN40-50 and SN55-71. -
Worm gear - 807049 for apron for lathes SN32, SN40-50, SN55-71 and SN500-710. -
Thread cutting table plate lathe SN55 TOS / TRENS Trenčín. -
Carriage stop for lathe SV18R a SV18RA. -
Block 803180 for speed gearbox for lathes SN40, SN45 and SN50. Required quantity: 2 pieces -
Screw and nut for cross slide for carriage and slides for lathe SN50 and SN500. The nut is a semi-finished product. -
Cam - rapid traverse for apron for lathes SN40B, SN45B, SN50B, SN55B, SN63B and SN71B. Inner diameter of the cam: ⌀ 42 mm. Included: 3 pcs spings, 3 pcs roller and 3 pcs pins. -
Gear wheel - 807036 for apron for lathes SN32, SN40-50 and SN55-71. -
Half-nut - 707189 for apron for lathes SN55, SN63 and SN71.