USD 
-
Self-centring scroll chuck TOS Svitavy IUG/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Pinion 243882 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG -
Key with spring 243864 for IUS and IUG chucks. -
Socket spanner for 4 way toolblock for lathes. Available sizes: M12 M14 M16 -
Gib for cross slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm 9,5 mm 10 mm 10,5 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Available sizes: MK1 MK2 MK3 MK4 MK5 MK6 -
Set of plates INCH for lathe SN40B and SN50B TOS / TRENS Trenčín. -
Bushing - rapid traverse for apron for lathes SN40C, SN45C, SN50C, SN55C, SN63C, SN71C SN500, SN630 and SN710. -
Gear 44/3 - 703023 wheel for speed gearbox for lathe SN55, SN63 and SN71. -
Complete set of wipers lathe SN55, SN63 and SN71. -
Bushing 22 mm for apron for lathes SN500, SN630 and SN710. -
Rear shifter - 807124 (complete) for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710.