USD 
-
Sleeve for for steady and mobile rests for the following lathes: - SV18R, SV18RA and SV18RD - SN32, SN40, SN45 and SN50 - SUI40 and SUI50 -
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1000 mm. -
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1250 mm.
-
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 750 mm - 2 pieces. Sold in pairs. -
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1000 mm - 2 pieces. Sold in pairs.
-
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1250 mm - 2 pieces. Sold in pairs.
-
Lead screw for lathes SN40-50, length 1000 mm.
-
Lead screw for lathes SN40-50, length 1500 mm.
-
Lead screw for lathes SN40-50, length 2000 mm.
-
Carriage stop for lathe SV18R a SV18RA. -
Basic table plates for TOS / TRENS Trenčín lathe SN32. Metric execution. ELOX finish, no glue, newest version. The data on the tables match previous versions. Contains: Metric table - M90V4764100 - 280x230 mm Speeds - M90V0864102-4 - 245x135 mm -
Basic table plates for TOS / TRENS Trenčín lathe SN32. Inch execution. ELOX finish, no glue, newest version, newest version. The data on the tables match previous versions. Contains: Inch table - M90V4764110 - 280x230 mm Speeds - M90V0864102-4 - 245x135 mm -
Functional plates for TOS / TRENS Trenčín lathe SN32. Metric execution. ELOX finish, no glue, newest version. The data on the tables match previous versions. Contains: Metric table - M90V4764100 - 280x230 mm Speeds - M90V0864102-4 - 245x130 mm ABC - M90V0864103 - 100x35 mm Nut + direction - M90V0864118-2 - 120x35 mm M/W - M90V0864151-0 - 50x70 mm 19/1 - M90V0864104 - 100x35 mm -
Screw for cross slide gib SV18 - front for lathe SV18R, SV18RA and SV18RD. -
Screw for cross slide gib SV18 - back for lathe SV18R, SV18RA and SV18RD. -
Brake screw for lathe SV18R, SV18RA and SV18RD. -
Lever for toolblock for lathe SV18R, SV18RA and SV18RD. -
Tailstock barrel for lathe SV18R, SV18RA and SV18RD. -
Tailstock lever for SV18R, SV18RA and SV18RD lathes. -
Tailstock jaws (bottom and upper) for SV18R, SV18RA and SV18RD lathes. -
Tailstock vernier (metric) 0-4 mm for SV18R, SV18RA and SV18RD lathes. -
Screw and Nut for tailstock with vernier for SV18R, SV18RA and SV18RD lathes. Screw lenght: 295 mm. -
Screw and Nut for tailstock without vernier for SV18R, SV18RA and SV18RD lathes. Screw lenght: 260 mm. -
Tailstock vernier hub for SV18R, SV18RA and SV18RD lathes. -
Tailstock spacer ring for SV18R, SV18RA and SV18RD lathes. -
Tailstock Nut for SV18R, SV18RA and SV18RD lathes. -
Nut 907026 with set screws for SV18R, SV18RA and SV18RD lathes. Set screws: * set screw long 907022 * set screw short 907023 -
Nut case for SV18R, SV18RA and SV18RD lathes. -
Handle - 906042 for lathe SV18R, SV18RA and SV18RD. -
Screw for tool slide gib SV18 for lathe SV18R, SV18RA and SV18RD. -
Hand crank - 906044 for lathe SV18R, SV18RA and SV18RD. -
Pin - 906016 for lathe SV18R, SV18RA and SV18RD. -
Wheel - 906017 for lathe SV18R, SV18RA and SV18RD. -
Nut - 906063 for lathe SV18R, SV18RA and SV18RD. -
Washer - 906063 for lathe SV18R, SV18RA and SV18RD. -
Handle for wheel 906017 for lathe SV18R, SV18RA and SV18RD. -
Vernier ring holder for lathe SV18R, SV18RA and SV18RD. -
Excenter - 906019 for lathe SV18R, SV18RA and SV18RD. -
Pawl - 906075 for lathe SV18R, SV18RA and SV18RD. -
Vernier - tool slide for lathe SV18R, SV18RA and SV18RD. -
Vernier - cross slide for lathe SV18R, SV18RA and SV18RD. -
SV18 - screw and nut - tool slide for lathe SV18R, SV18RA and SV18RD. -
Holder - 906072 for lathe SV18R, SV18RA and SV18RD. -
SV18 - screw - cross slide for lathe SV18R, SV18RA and SV18RD. -
Glider wedge - 906065 for lathe SV18R, SV18RA and SV18RD.