USD 
-
Rear holder for apron for lathe SN32, SN40, SN45 and SN50. -
Rear shifter - 807124 for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Rear shifter - 807124 (complete) for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Retaining ring 904508 for clutch for lathe SV18R and SV18RA. Clutch lever for the retaining ring: 904514 -
Retractable handle for X wheel for carriage and slides for lathe SN32, SN40, SN50, SN63, SN71, SN400, SN500, SN630 and SN710. -
Retractable handle for Z wheel for apron for lathe SN32, SN40, SN50, SN63, SN71, SN400, SN500, SN630 and SN710. -
Ring for apron for lathe SUI32. -
Ring for apron for lathe SUI40 and SUI50. -
Ring - 902276 for speed gearbox for lathe SV18R and SV18RA. -
Ring - 902277 for speed gearbox for lathe SV18R and SV18RA. -
Ring 807109 for bushing 807096 for apron for lathes SN500, SN630 and SN710. -
Ring 807304 for apron for lathe SN32, SN40, SN45 and SN50. -
Rod 806029 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Rod 806032 for thread cutting gearbox for lathe SN40C, SN45C and SN50C. -
Roller guards for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. Applicable for turning length 750 and 1000 mm. -
Roller guards for lathes SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. Applicable for turning length 1500 mm.
-
Roller guards for lathes SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. Applicable for turning length 2000 mm.
-
Rolling contact with bearing for steady and mobile rests for the following lathes: - SV18R, SV18RA and SV18RD - SN32, SN40, SN45 and SN50 - SUI40 and SUI50 -
Screw - 807096 for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Screw - 807098 for apron for lathes SN40, SN45 and SN50. -
Screw - 807100 for apron for lathes SN32, SN40, SN45 and SN50. -
Screw for carriage and slides for lathe SN40, SN45 and SN50. -
Screw for cross slide lardon for carriage and slides for lathe SN40, SN45 and SN50. Required: 2 pieces Lardon: 804036 -
Screw for tool slide lardon for carriage and slides for lathe SN40, SN45 and SN50. Required: 2 pieces Lardon: 804037
-
Screw and Nut for tailstock with vernier for SV18R, SV18RA and SV18RD lathes. Screw lenght: 295 mm. -
Screw and Nut for tailstock without vernier for SV18R, SV18RA and SV18RD lathes. Screw lenght: 260 mm. -
Screw for cross slide gib SV18 - back for lathe SV18R, SV18RA and SV18RD. -
Screw for cross slide gib SV18 - front for lathe SV18R, SV18RA and SV18RD. -
Screw for tool slide gib SV18 for lathe SV18R, SV18RA and SV18RD. -
Screw for toolblock for 4 way toolblock for lathes. Available sizes: M8 M10 M12 M14 M16 M20 -
Screw for toolblock - 906049 for lathe SV18R, SV18RA and SV18RD. -
Scroll 243881 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG -
Scroll 243861 for these chucks: • IUS • IUZ • IUT • IUD • IUM
-
Self-centring scroll chuck TOS Svitavy IUG/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUG/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Self-centring scroll chuck TOS Svitavy IUG/4-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUG/4-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Self-centring scroll chuck TOS Svitavy IUH/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN6350. Contains: • 1 set of base jaw ZC • 1 set of hard reversible top jaw NT • 1 spanner -
Self-centring scroll chuck TOS Svitavy IUS/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Self-centring scroll chuck TOS Svitavy IUS/4-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/4-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Set of plates INCH for lathe SN40B and SN50B TOS / TRENS Trenčín. -
Set of plates METRIC for lathe SN40B and SN50B TOS / TRENS Trenčín. -
Set of plates for lathe SN55B TOS / TRENS Trenčín.