USD 
-
Shaft with pinion 904558 - SV18R for apron for lathe SV18R. -
Half-nut for lathe SV18R, SV18RA and SV18RD. -
Lever for apron for lathe SV18R, SV18RA and SV18RD. -
Pin - 904045 for lathe SV18R, SV18RA and SV18RD. -
Nut - 906060 for lathe SV18R, SV18RA and SV18RD. -
Worm for lathe SV18R, SV18RA and SV18RD. -
Red handle for apron for lathe SV18R, SV18RA and SV18RD. -
Worm gear for lathe SV18R, SV18RA and SV18RD. -
Short taper flange IUG-A/8 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm -
Short taper flange IUG-A/6 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm
-
Short taper flange IUG-A/5 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 160 mm - 200 mm - 250 mm - 315 mm
-
Flange for SV18 lathe. Material: gray cast iron Thread: M68x6 -
Independent face plate LUD A four-jaw chuck in which the clamping of the workpiece is ensured by an independent movement of the jaws by means of a trapezoidal screw engaged with the jaw. • chuck body - ductile cast iron • 4-jaw chuck • clamping the chuck on the machine spindle • Type M2 through cylindrical mounting with screws from the rear or front mounting • Type A, B, D using an intermediate flange -
Self-centring scroll chuck TOS Svitavy IUH/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN6350. Contains: • 1 set of base jaw ZC • 1 set of hard reversible top jaw NT • 1 spanner -
Self-centring scroll chuck TOS Svitavy IUG/4-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Shaft - 903606 for lathe SV18R, SV18RA and SV18RD. -
Label holder for lathe SV18R, SV18RA and SV18RD. -
Gear wheel - 903511 for lathe SV18R, SV18RA and SV18RD. -
Oil mark M24x1,5 for lathe SV18R, SV18RA and SV18RD. -
Shaft - 903503 for lathe SV18R, SV18RA and SV18RD. -
Clutch lever complete 904517 for lathe SV18R and SV18RA. When changing the clutch lever we recommend changing also the retaining ring 904508. -
Shaft IV with gearing - 903048 for lathe SV18R, SV18RA and SV18RD. -
Retaining ring 904508 for clutch for lathe SV18R and SV18RA. Clutch lever for the retaining ring: 904514 -
Shaft II with pinion - 903047 for lathe SV18R, SV18RA and SV18RD. -
Shaft VII - 903043 for lathe SV18R, SV18RA and SV18RD. -
Shaft IV - right - 903039 for lathe SV18R, SV18RA and SV18RD. -
Shaft III - right - 903038 for lathe SV18R, SV18RA and SV18RD. -
Shaft III - left - 903037 for lathe SV18R, SV18RA and SV18RD. -
Shaft II - middle - 903035 for lathe SV18R, SV18RA and SV18RD. -
Shaft I - 903034 for lathe SV18R, SV18RA and SV18RD. -
Shaft - right - 903032 for lathe SV18R, SV18RA and SV18RD. -
Change gear wheel - 113t for lathe SV18R, SV18RA and SV18RD. -
Change gear wheel - 71t for lathe SV18R, SV18RA and SV18RD. -
Change gear wheel - 48t for lathe SV18R, SV18RA and SV18RD. -
Change gear wheel - 24t for lathe SV18R, SV18RA and SV18RD. -
Self-centring scroll chuck TOS Svitavy IUG/4-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Self-centring scroll chuck TOS Svitavy IUG/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUG/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Self-centring scroll chuck TOS Svitavy IUS/4-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/4-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Self-centring scroll chuck TOS Svitavy IUS/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Gear wheel - 903064 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903063 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft II: 903077 -
Gear wheel - 903062 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft III: 903037 -
Gear wheel - 903059 for shaft II for lathe SV18R, SV18RA and SV18RD. Shaft III: 903037