USD 
-
Toolblock SV18RA with screws for lathe SV18R, SV18RA and SV18RD. -
Toolblock SV18RA for lathe SV18R, SV18RA and SV18RD.
-
Screw for toolblock - 906049 for lathe SV18R, SV18RA and SV18RD. -
Self-centring scroll chuck TOS Svitavy IUG/4-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUG/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Lever for apron for lathes SN500, SN630 and SN710. -
Bushing 22 mm for apron for lathes SN500, SN630 and SN710. -
Lever joint for apron for lathes SN500, SN630 and SN710. -
Toolblock with screws for carriage and slides for lathe SUI40 and SUI50. -
Tailstock barrel for lathe SUI40 and SUI50. Basic size: ⌀ 80,00 mm When ordering please specify the requested diameter. -
Barrel screw and nut for tailstock for lathes SUI40-50. Composed: 30 05 193 – screw 30 05 198 – nut -
Speed plate for lathes SUI40 and SUI50. -
Speed plate for lathes SUI40 and SUI50. -
Shaft I for apron for lathe SUI40 and SUI50. -
Shifter A for apron for lathes SUI40 and SUI50. -
Shifter B for apron for lathes SUI40 and SUI50.
-
Flange for apron for lathes SUI40 and SUI50. -
Shaft - 34 07 123 for apron for lathe SUI63 and SUI80. Module 4,5 / 11 teeth. -
Pinion - 34 07 126 for apron for lathe SUI63 and SUI80. Module 4 / 11 teeth. -
Pinion - 34 07 110 for apron for lathe SUI63 and SUI80. Module 3 / 17 teeth. -
Bushing with hex hole 36 mm - 34 07 151 for apron for lathe SUI63 and SUI80. -
Lever - 34 07 211 for apron for lathe SUI63 and SUI80. -
Gear wheel - 34 07 107 for apron for lathes SUI63 and SUI80. Module 1,25 / 112 teeth -
Shaft - 34 07 125 for apron for lathe SUI63 and SUI80. Module 1,25 / 18 teeth -
Gear wheel - 34 07 124 for apron for lathes SUI63 and SUI80. Module 4 / 35 teeth -
Gear wheel - 34 07 111 for apron for lathes SUI63 and SUI80. Module 3 / 33 teeth -
Gear wheel - 37 07 106 for apron for lathes SUI63 and SUI80. Module 3 / 20 teeth -
Gear wheel - 37 07 100 for shifters for apron for lathes SUI63 and SUI80. Module 3 / 16 teeth. -
Gear wheel 28/2.75 - 803059 for speed gearbox for lathes SN40, SN45 and SN50. -
CAMLOCK bolt and nut for flanges DIN 55029 inch, ISO 702/II inch, ČSN ISO 702/II inch. -
Independent face plate LUD A four-jaw chuck in which the clamping of the workpiece is ensured by an independent movement of the jaws by means of a trapezoidal screw engaged with the jaw. • chuck body - ductile cast iron • 4-jaw chuck • clamping the chuck on the machine spindle • Type M2 through cylindrical mounting with screws from the rear or front mounting • Type A, B, D using an intermediate flange -
Pinion 243888 for these chucks: • IUGS • IUHS -
Pinion 243882 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG
-
Pinion 243862 for these chucks: • IUS • IUZ • IUT • IUD • IUM
-
Ring 807109 for bushing 807096 for apron for lathes SN500, SN630 and SN710. -
Half-nut complete (semifinished product) for apron for lathes SN500, SN630 and SN710. -
Half-nut complete for apron for lathes SN500, SN630 and SN710. We provide only in exchange for old brackets! -
Half-nut complete for apron for lathes SN500, SN630 and SN710. Sold together with brackets.
-
Lever 803211 for speed gearbox for lathes SN400, SN500, SN630 and SN710. Required quantity: 24 pieces -
Tailstock barrel for lathe SN500, SN630 and SN710. Basic size: ⌀ 80,00 mm When ordering please specify the requested diameter.
-
Barrel screw and nut for tailstock for lathes SN500, SN630 and SN710. Composed: 30 05 193 – screw 30 05 198 – nut
-
ABC plate for lathes SUI40 and SUI50. -
I-II-III plate for lathes SUI40 and SUI50. -
Threading plate (round) for lathes SUI40 and SUI50.