USD 
-
Coolant pump for machine tools. Immersion depth: 150 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C. -
Coolant pump for machine tools. Immersion depth: 120 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Scroll 243861 for these chucks: • IUS • IUZ • IUT • IUD • IUM -
Gib for tool slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Flat belt for lathes SV18RA and SV18RD. Width: 100 mm Available lengths: - 1990 mm - 2340 mm - 2360 mm Other lengths on request. -
Shear pin 806084 for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Screw and nut for cross slide for carriage and slides for lathe SN50. Inch version. 8 TPI. The nut is a semi-finished product. -
Felt wiper for carriage and slides for lathe SN55, SN63, SN71, SN500, SN630, SN710. -
Front shifter - 807125 (complete) for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Bushing 22 mm for apron for lathes SUI40 and SUI50. -
Thread cutting table plate lathe SN71 TOS / TRENS Trenčín. -
Screw and nut for cross slide for carriage and slides for lathe SN55 and SN500. The nut is a semi-finished product. -
Bushing 27 mm for apron for lathes SN40-50 and SN55-71. -
Gear wheel - 807042 for apron for lathes SN32, SN40-50 and SN55-71. -
Gear wheel - 807041 for apron for lathes SN32, SN40-50 and SN55-71. -
Gear wheel - 807040 for apron for lathes SN32, SN40-50 and SN55-71. -
Shaft II - 807019 for apron for lathe SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. -
Worm for apron for lathes SN32, SN40B, SN45B, SN50B, SN55B, SN63B and SN71B. -
Bushing - rapid traverse for apron for lathes SN40B, SN45B, SN50B, SN55B, SN63B and SN71B. -
Lever for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
4 way toolblock with screws and socket spanner for carriage and slides for lathe SN40, SN45 and SN50. Composed: 804054 – 4 way toolblock 804025 – ring 804027 – ring 804024 – bushing 804054 – screw 804514 – screw – 8 pieces 804031 – socket spanner -
Gear wheel 32/2.75 - 803075 for speed gearbox for lathes SN40, SN45 and SN50. -
Tailstock Nut for SV18R, SV18RA and SV18RD lathes. -
Screw and Nut for tailstock without vernier for SV18R, SV18RA and SV18RD lathes. Screw lenght: 260 mm. -
Screw for tool slide gib SV18 for lathe SV18R, SV18RA and SV18RD. -
SV18 - screw - cross slide with conical ruler for lathe SV18R, SV18RA and SV18RD. -
Duplex gear wheel 901032 for SV18R, SV18RA and SV18RD lathes. -
Coolant pump for machine tools. Immersion depth: 250 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 150 mm. Power supply: 3x400V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Short taper flange IUG-A/6 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 200 mm - 250 mm - 315 mm - 400 mm -
Self-centring scroll chuck TOS Svitavy IUG/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN 6350. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-1-M1 SUPERIOR Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws -
Self-centring scroll chuck TOS Svitavy IUS/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to STN 243801. Contains: • 1 set of hard outer jaws SCV • 1 set of hard inner jaws SCN • 1 spanner • clamping screws
-
Pinion 243882 for these chucks: • IUG • IUH • IUGO • IUGG • IUHG -
Key with spring 243864 for IUS and IUG chucks. -
Socket spanner for 4 way toolblock for lathes. Available sizes: M12 M14 M16 -
Gib for cross slide for carriage and slides for lathe SN40, SN45 and SN50. Available sizes: 5,5 mm 6 mm 6,5 mm 7 mm 7,5 mm 8 mm 8,5 mm 9 mm 9,5 mm 10 mm 10,5 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Available sizes: MK1 MK2 MK3 MK4 MK5 MK6 -
Set of plates INCH for lathe SN40B and SN50B TOS / TRENS Trenčín. -
Bushing - rapid traverse for apron for lathes SN40C, SN45C, SN50C, SN55C, SN63C, SN71C SN500, SN630 and SN710. -
Gear 44/3 - 703023 wheel for speed gearbox for lathe SN55, SN63 and SN71. -
Complete set of wipers lathe SN55, SN63 and SN71. -
Bushing 22 mm for apron for lathes SN500, SN630 and SN710. -
Rear shifter - 807124 (complete) for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710.