USD 
-
Short taper flange IUG-A/11 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm -
Short taper flange IUS-A/11 DIN 55026 / ISO ISO702-I / ČSN ISO702-I. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm
-
Screw and nut for cross slide screw for lathe SU50 and SU50A TOS Lipník nad Bečvou. The Nut is a semi-finished product. -
Live centres are determined for the lathe-turning for quick and simple clamping hollow workpieces with big diameter which cannot be clamped by common live center. End of revolving part is cone 1:10 for setting clamping inserts with apex angle 60° or 90°. Live centers are provided with the cone Morse taper according to CSN 22 04208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK3 MK4 MK5 MK6 -
4 way toolblock with screws for carriage and slides for lathe SN40, SN45 and SN50. Composed: 804054 – 4 way toolblock 804025 – ring 804027 – ring 804024 – bushing 804054 – screw 804514 – screw – 8 pieces -
Tailstock manual feed complete with handle for lathes TOS Trenčín / TRENS SN55, SN63 and SN71. -
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1000 mm - 2 pieces. Sold in pairs. -
Toolblock with screws and spanner for carriage and slides for lathe SUI40 and SUI50. -
Gear 60/3,25 - 703038 wheel for speed gearbox for lathe SN55, SN63 and SN71. -
Bushing with hex hole 36 mm - 34 07 151 for apron for lathe SUI63 and SUI80. -
The live centers with interchangeable inserts are for working on lathes. Their design allows universal use in the piece production. End of revolving part is ended by cone hollow for clamping inserts a ÷ g. Morse cone CSN 22 0420 (DIN 228, ISO 296) without clamping thread. Special supply is with set of interchangeable inserts according to customer wish. Spare parts are individual interchangeable inserts. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Toolblock SV18RA with screws, lever and key for lathe SV18R, SV18RA and SV18RD. -
Screw and nut for cross slide for carriage and slides for lathe SN55 and SN500. Inch version. 4TPI. The nut is a semi-finished product. -
Lead screw for lathes SV18R, SV18RA and SV18RD, length 750 mm. -
Short taper flange IUG-D/8 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm -
Short taper flange IUS-D/8 DIN 55029 inch / ISO ISO702-II inch / ČSN ISO702-II inch. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 250 mm - 315 mm - 400 mm
-
4 way toolblock with screws and socket spanner for carriage and slides for lathe SN40, SN45 and SN50. Composed: 804054 – 4 way toolblock 804025 – ring 804027 – ring 804024 – bushing 804054 – screw 804514 – screw – 8 pieces 804031 – socket spanner -
Screw and nut for cross slide for carriage and slides for lathe SN63, SN71, SN630 and SN710. Inch version. 4TPI. The nut is a semi-finished product. -
Half-nut complete for apron for lathes SN500, SN630 and SN710. Sold together with brackets. -
Toothed rack for lathes SV18R, SV18RA and SV18RD, length 1250 mm - 2 pieces. Sold in pairs.
-
Lead screw for lathes SN40-50, length 1000 mm.
-
Short taper flange IUG-B/11 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUG, IUGO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm -
Short taper flange IUS-B/11 DIN 55027 / ISO ISO702-III / ČSN ISO702-III. For chucks: IUS, IUSO, IIUH. IUHO. Available sizes: - 315 mm - 400 mm
-
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1000 mm.
-
Screw and Nut for cross slide screw for lathe SUI63-80. The Nut is a semi-finished product. -
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1250 mm.
-
Support for leadscrew and bars for the bed for lathes TOS Trenčín / TRENS SN55, SN63 and SN71. Turning length 3000 - 1 pc required Turning length 4000 - 2 pcs required -
Self-centring scroll chuck TOS Svitavy IUH/3-2-M1 Chuck body - ductile cast iron. Functional surfaces ground, ensure accuracy of clamping and extend chuck life. From ø160 size hardened and ground steel tongues for guiding jaws. Clamping the chuck on the machine spindle by means of an intermediate flange according to DIN6350. Contains: • 1 set of base jaw ZC • 1 set of hard reversible top jaw NT • 1 spanner -
Lead screw for lathes SN40-50, length 1500 mm.
-
Tailstock barrel for lathe SN40, SN45 and SN50.