USD 
-
Coupling wheel - left 901036 for SV18R, SV18RA and SV18RD lathes. -
Set of plates for lathe SV18RA. -
Adjusting screw 901070 for SV18R, SV18RA and SV18RD lathes. -
Set of rivets (30 pieces) for plates. -
Flat belt glue for SV18R lathes. Composed: glue 100 g hardener cement K 20g -
Threading plate for thread cutting gearbox for SV18R. -
Oil mark M36x1,5 for lathe SV18R, SV18RA and SV18RD. -
Speed plate (sticker) for speed gearbox for lathe SV18RA. -
Gear clutch 901076 for lathes SV18R, SV18RA and SV18RD. Spare parts and accessories for TOS / TRENS Trenčín lathes. -
Shaft IV - 901019 - headstock for lathes SV18R and SV18RA. Shaft clutch: * gear clutch - 901037 (link to product 901037) -
Gear wheel 901033 for SV18R, SV18RA and SV18RD lathes. -
Duplex gear wheel 901032 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel 901031 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel 901030 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel - template 901034 for SV18R, SV18RA and SV18RD lathes. -
Gear wheel - template 901028 for SV18R and SV18RA lathes. -
Gear wheel - template for SV18RD lathes. -
Flat pulley for SV18R, SV18RA and SV18RD lathes. -
Coupling wheel - right 901035 for SV18R, SV18RA and SV18RD lathes. -
Half dead centres are for clamping workpieces on machine-tools or checking instruments. DIN 3317, 60 ° apex angle. Dead centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK0 MK1 MK2 MK3 MK4 MK5 MK6 -
Dead centres are for clamping workpieces on machine-tools or checking instruments. DIN 3311, 60 ° apex angle. Dead centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK0 MK1 MK2 MK3 MK4 MK5 MK6 -
The live centers with interchangeable inserts are for working on lathes. Their design allows universal use in the piece production. End of revolving part is ended by cone hollow for clamping inserts a ÷ g. Morse cone CSN 22 0420 (DIN 228, ISO 296) without clamping thread. Special supply is with set of interchangeable inserts according to customer wish. Spare parts are individual interchangeable inserts. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
The live centers are specified for NC lathe. Profile of clamping part allows easy access tool to workpiece, which it is suitable for cutting shaped parts. Design of live center allows to adjust the clearance in radial bearing in front of part of live center. Live centres have Morse cone according to ČSN 2204208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK2 MK3 MK4 MK5 -
Live centres are determined for the lathe-turning for quick and simple clamping hollow workpieces with big diameter which cannot be clamped by common live center. End of revolving part is cone 1:10 for setting clamping inserts with apex angle 60° or 90°. Live centers are provided with the cone Morse taper according to CSN 22 04208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK3 MK4 MK5 MK6 -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Available sizes: MK1 MK2 MK3 MK4 MK5 MK6 -
Coolant pump for machine tools. Immersion depth: 120 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C. -
Coolant pump for machine tools. Immersion depth: 150 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 180 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.
-
Coolant pump for machine tools. Immersion depth: 200 mm. Power supply: 1x240V. Degree of protection against fluid penetration: IP 54. Parts of the motor are made of non-flammable thermoplastic material in accordance with the following standards: VDE 0730 and UL 94. Low weight and dimensions, excellent technical parameters together include an ideal solution for cooling the cutting processes of machine tools. Maximal fluid temperature: 65°C.