USD 
-
Key with spring 243864 for IUS and IUG chucks. -
Key with spring 243870 for LUD chucks.
-
Label holder for lathe SV18R, SV18RA and SV18RD. -
Lead screw for lathes SN40-50, length 1000 mm. -
Lead screw for lathes SN40-50, length 1500 mm.
-
Lead screw for lathes SN40-50, length 2000 mm.
-
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1000 mm.
-
Lead screw for lathes SV18R, SV18RA and SV18RD, length 1250 mm.
-
Lead screw for lathes SV18R, SV18RA and SV18RD, length 750 mm.
-
Supply voltage: DC 10 to 48 V, AC 12 to 35 V Consumption: 11W Light source: LED Cree XHP-L Ra=80 Luminous flux: 1100 lm Minimal lifetime: 50 000 h Ingress protection: IP67 Ambient temperature: -20 to +50°CSize Luminary body diameter: 70 mm Luminary body length: 70 mm Stand height: 46 mm Flexible tube length: 450 mm -
Supply voltage: DC 10 to 48 V, AC 12 to 35 V Consumption: 11W Light source: LED Cree XHP-L Ra=80 Luminous flux: 1100 lm Minimal lifetime: 50 000 h Ingress protection: IP67 Ambient temperature: -20 to +50°C
Size Luminary body diameter: 70 mm Luminary body length: 70 mm Stand height: 46 mm Flexible tube length: 700 mm -
Lever for apron for lathe SV18R, SV18RA and SV18RD. -
Tailstock lever for SV18R, SV18RA and SV18RD lathes. -
Lever 803214 for speed gearbox for lathes: - SN32 - SN40, SN45, SN50 - SN55, SN63, SN71 - SM16 - SUI32 - SUI40-50 Required quantity: 24 pieces -
Lever for lathe SUI32. -
Lever 803211 for speed gearbox for lathes SN400, SN500, SN630 and SN710. Required quantity: 24 pieces -
Lever for apron for lathes SN500, SN630 and SN710. -
Lever for apron for lathes SUI40 and SUI50. -
Lever - 34 07 211 for apron for lathe SUI63 and SUI80. -
Lever - 807082 for apron for lathes SN32, SN40-50 and SN55-71.
-
Lever for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. -
Lever and flange for lathe SUI32. -
Lever for toolblock for lathe SV18R, SV18RA and SV18RD. -
Lever joint for apron for lathes SN40A/B, SN45A/B and SN50A/B, SN55A/B,SN63A/B and SN71A/B. Composed: 807300 - lever joint 807301 - piston of lever - 4 pieces 807302 - spring of piston - 4 pieces 807285 - -
Lever joint for apron for lathes SN40C, SN45C, SN50C, SN55C, SN63C and SN71C. Composed: 883303 - lever joint 807301 - piston of lever - 4 pieces 807302 - spring of piston - 4 pieces 807285 - -
Lever joint for apron for lathes SN500, SN630 and SN710. -
Lever of shifter apron for lathes SUI40 and SUI50. -
Lid 804018 for carriage and slides for lathe SN40, SN45 and SN50. -
Lid 804018A for carriage and slides for lathe SN40, SN45 and SN50. -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Live centres are determined for the lathe-turning for quick and simple clamping hollow workpieces with big diameter which cannot be clamped by common live center. End of revolving part is cone 1:10 for setting clamping inserts with apex angle 60° or 90°. Live centers are provided with the cone Morse taper according to CSN 22 04208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK3 MK4 MK5 MK6 -
The live centers are specified for NC lathe. Profile of clamping part allows easy access tool to workpiece, which it is suitable for cutting shaped parts. Design of live center allows to adjust the clearance in radial bearing in front of part of live center. Live centres have Morse cone according to ČSN 2204208 (DIN 228, ISO296) without the clamping thread. Availables sizes: MK2 MK3 MK4 MK5 -
The live centers with interchangeable inserts are for working on lathes. Their design allows universal use in the piece production. End of revolving part is ended by cone hollow for clamping inserts a ÷ g. Morse cone CSN 22 0420 (DIN 228, ISO 296) without clamping thread. Special supply is with set of interchangeable inserts according to customer wish. Spare parts are individual interchangeable inserts. Availables sizes: MK2 MK3 MK4 MK5 MK6 -
Live centers are determined for workpiece chucking in lathes or to work in grinding machines, especially by the grinding workpiece higher weight. The construction of live centers features with small diameter head of tip, allow easy access tool to the workpiece. Live centers with cone MK 2 ÷ 6 is possible adjusting clearance in front of radial bearing. Live centers have shank with cone MORSE according to ČSN 22 0420 (DIN 228, ISO 296) without clamping thread. Available sizes: MK1 MK2 MK3 MK4 MK5 MK6 -
Locking pin of pinions. -
Locking washer - 9020159 for speed gearbox for lathe SV18R and SV18RA. -
Locking washer - 9020160 for speed gearbox for lathe SV18R and SV18RA.
-
Lubrication pump for thread cutting gearbox for lathe SN32, SN40-SN50 and SN55-SN71. Composed: washer 806125 piston 806036 spring 806161 pump housing 806007 sealing 806198 plug 806147 -
Bolt for LUD chuck TOS Svitavy. -
Main control panel for lathes SN40C, SN50C, SN63C, SN71C. Control output: 24V -
Microswtich cover on chuck guard for lathes SN40, SN50, SN63, SN71C. -
Nut - 906060 for lathe SV18R, SV18RA and SV18RD. -
Nut - 906063 for lathe SV18R, SV18RA and SV18RD. -
Nut 703073 for speed gearbox for lathes SN55, SN63 and SN71. -
Nut 803185 for speed gearbox for lathes SN40, SN45 and SN50. Complete set: driver 803074 driver 803079 sleeve 803104 Nut 803185 internal friction disc 803221 external fristion disc 803217