USD 
-
Micrometer carriage stop for carriage and slides for lathe SN55, SN63 and SN71. -
Support for leadscrew and bars for the bed for lathes TOS Trenčín / TRENS SN55, SN63 and SN71. Turning length 3000 - 1 pc required Turning length 4000 - 2 pcs required -
Tailstock manual feed complete with handle for lathes TOS Trenčín / TRENS SN55, SN63 and SN71. -
Screw and nut for tool slide for carriage and slides for lathe SN55, SN63, SN71, SN500, SN630 and SN710. Inch version. 5TPI. The nut is a semi-finished product. -
Screw and nut for tool slide for carriage and slides for lathe SN55, SN63, SN71, SN500, SN630 and SN710. The nut is a semi-finished product.
-
Screw and nut for cross slide for carriage and slides for lathe SN63, SN71, SN630 and SN710. Inch version. 4TPI. The nut is a semi-finished product. -
Screw and nut for cross slide for carriage and slides for lathe SN63, SN71, SN630 and SN710. The nut is a semi-finished product.
-
Socket spanner for 4 way toolblock for lathes. Available sizes: M12 M14 M16 -
Base jaw SM and soft top jaw ND/NC. Set of 3. Sold in sets. -
Base jaw SM and soft top jaw ND/NC. Set of 4. Sold in sets.
-
Monoblock solid soft jaw MC. Set of 3. Sold in sets. -
Monoblock solid soft jaw MC. Set of 4. Sold in sets.
-
Tailstock spacer ring for SV18R, SV18RA and SV18RD lathes. -
Speed indication plate (variable) for lathes SUI40RP and SUI50RP. -
Speed indication plate SUI40-50 for lathes SUI40 and SUI50. -
Speed plate for lathes SUI40 and SUI50. -
Speed plate for lathes SUI40 and SUI50. -
Speed plate (sticker) for speed gearbox for lathe SV18RA. -
Speed plate for lathes SUI32 and SUI32A. Dimensions: 363x74 mm -
Spindle brake for speed gearbox for lathe SV18R and SV18RA. -
Spiral guard for apron for lathe SN55, SN63, SN71, SN630 and SN710. For SN lathes with turning length above 3000 mm. Required 4 pieces. -
Spline shaft for speed gearbox for lathes SN40, SN45 and SN50. Gear wheel for shaft: 803067 -
Spring and finger for apron for lathes SN32, SN40, SN45, SN50, SN55, SN63, SN71, SN500, SN630 and SN710. Composed: 807113 - spring 807024 - finger -
Steady contact for steady and mobile rests for the following lathes: - SV18R, SV18RA and SV18RD - SN32, SN40, SN45 and SN50 - SUI40 and SUI50 -
Steady rest for lathes SN50. Claping diameter: 10-115 mm. -
Strip piece for apron for lathe SN40, SN45 and SN50. Available sizes: 7 mm 7.5 mm 8 mm 8.5 mm 9 mm 9.5 mm 10 mm The thickness of the strip piece is to be measured on the thiner side. Other thicknesses upon request. Screws for the strip piece: 807098 -
Screw and nut for cross slide screw for lathe SU50 and SU50A TOS Lipník nad Bečvou. The Nut is a semi-finished product. -
Screw and nut for cross slide screw for lathe SUI32. Inch version. 6TPI. The nut is a semi-finished product. -
Screw and nut for cross slide screw for lathe SUI32. The nut is a semi-finished product.
-
Screw and nut for tool slide screw for lathe SUI32. The nut is a semi-finished product.